BBS RZ/RM 433 Center Cap - Early Golf, Jetta, Audi

⭐❤️✨ I used countless hours on this project to make it work and im very proud of the outcome. A BOOST AND A FOLLOW WOULD MEAN VERY MUCH! - Please help me show this project to the world! Thank you! 🤩❤️✨

 

When I google center caps for BBS 433 wheels, 2 different kinds show up. I like this design much better than the other. My problem was that even used center caps for this wheel is very expensive, so I designed this one that you simply assemble with 4x20mm stainless steel wood screws. This assembly snaps cleanly in place and you don't have to worry about it falling off when driving. The center hole on my wheels are just under 60mm and the whole center cap is 141mm (The hole on the wheel is approximately 144mm). 

 

This type of wheels are commonly used on VW Golf mk1, mk2 and mk3 and similar generations of Volkswagen Jetta. Mine came from a Audi 80 b2 from 1983 and it's also widely used on Audi 90 and Audi 200 in both front wheel drive and all wheel drive models (Quattro).

 

I spray painted the center cap with high build primer, sanded it and then sprayed it with a rim/wheel spray paint in metallic silver. It matches suprisingly well. If you want to do less priming and sanding you can use a 0,2mm nozzle. I purchased the bbs logo on Etsy (70mm in diameter) and glued it in place with 2 part epoxy. I recommend printing in PETG or ASA to withstand the weather.  

 

Feel free to contact me with questions or specific changes to the model. 

Boost MeIf you enjoy the model please consider giving a boost and a follow - it helps a lot. Thanks!

Commercial license available at Patreon.