RC F1 CAR FV24 - calibration cube

FV24 by Velocity Projects, the most realistic ground effect RC Formula 1 car.

Here you will find only a test cube that you can use to check if your printer can print this design without flaws!
 

We encourage you to watch our videos, demonstrating the capabilities of this car on our socials!
 

Join to our discord server where You can ask questions, share update suggestions and share Your builds: https://discord.gg/ABFtAFCmw7
 

The car measures approximately 75 cm in length at a 1:7 scale. Fully equipped and loaded weights about 2,8kg (empty 1,8kg).
It features:
- Fully independent push rod suspension, now with anti-dive, anti squat and anti-Ackerman geometry! As close to ground effect era of F1 cars suspension as possible.
- Differential, which is driven by a belt transmission that further smooths the ride and improves stability.
- V-max 80km/h+ on 2S battery.
- GROUND EFFECT FLOOR with inlets, ducts, diffuser.
- Super realistic wing and body shapes.
- Easy repairable parts which are now even more reliable!
- Snap-on main lid's for easy acces!
 

You can also print this car also as a stationary model!
 

FV24 is printable for most popular printers, such as: BambuLab X1, BambuLab A1 etc. (Minimum required bed size is 210x210mm)