WDT - Modern Fluted Design with Magnetic Storage

This 5 pronged WDT features an embedded magnet to allow for convenient storage on or near your coffee machine. 

To construct this build, you will need acupuncture needles with a 1.3mm ‘base’ (or thick portion) – the length is not critical, but for reference, the ones shown are about 50mm excluding the ‘base’. 

Additionally the magnets I used were 5mm diameter by 2.7mm thickness. 

NOTE: 

If you want to include the magnet in the design, please use the .3mf Bambu project file that includes a pause in the build, giving you a chance to insert the M5 - 2.7mm magnet. 

Once inserted, resuming the build will envelop the magnet inside the 3d print. 

If you do not want the magnet, please ignore or remove the pause in the print, there shouldn't be any issues.