LaMetric TIME Holder for SKÅDIS

If you are like me and you'd rather have your desk free of this additional device, then it's TIME to hang this pixel clock on the pegboard!

This should be compatible with the latest version of the device (TIME 2022+) as well, as the physical specifications looked the same. However, I can't confirm it 100% – so if you own one and could do so for the community, I would love to thank you and put your name on here!

It takes some ~110g of filament, but print with very tiny supports (only for the cable holders at the back). It even prints on the A1 Mini! All thanks to the custom split design that snaps together neatly. And no glue is needed at all.

Important Notes

• You will need an angled USB cable (see the pictures) to route the cable along the back and out to the edge of the pegboard; otherwise, with the original cable, it would take too much space and the device would be sticking out too much – at this point, you might as well print some sort of tray and put it on there.
• With all the parts printed, the way you put the LaMetric TIME in the holder is by attaching the two halves on the sides of the device and snap lock it as you put them together. So you do not combine the parts and then try to insert the device top-down, that's not going to work, the holder is designed to be snug-fit enough to hold the thing in place securely, but smooth enough to scratch nothing.

Hope you enjoy it. Happy printing!