Elegant furniture feet

I designed this furniture feet in two versions with screw holes and without screw holes, i think the desing is really smooth and i personally like it a lot!

other than this the model is super efficient and low filament use, only 74 grams of filament!! it can resist over 35 kg (apx. 77 pounds) i didn't have more weight to put on but i think it can resist a lot more because i tried it with some heavy furnitures. i made the model height apx. 102mm because it's the most versatile height, if you screw it all in the model will be 61mm. for the version with the screw holes: the holes are 5mm large allowing you to screw it safely to any furniture you want! here's a section view:

I printed this model with bambulab PETG-HF for a stronger result, i didn't have any issues printing this model but here are some tips:

1. CLEAN the buildplate 
2. If you have adhesion problems use some 3d printing lacquer
3. make sure your filament is not humid
4. if you have any tollerance issue check your printing settings.

5. the print orientation is like the photo above

   dont worry if the model has some friction it's totally normal, just screw it and choose your ideal height and thath's it!! happy printing!

If you have any suggestion or advice for the model please tell me,i hope you liked it! and if you can leave me a boost it will help me to continue my journey here in makerworld!