Universal Trunk Cargo Holder, Velcro + Strap

Universal Trunk Cargo Holder – Velcro + Strap Compatible (No Supports)

111 gram

This universal cargo holder helps keep boxes, bags, and bottles from sliding around in your car trunk. The wide base attaches to the trunk carpet using hook-side velcro, while the angled face acts as a wedge to block moving cargo.

A slot is included so a cargo strap can pass through and stay centered, and a round opening can hold a bottle by the neck to prevent rolling.

The model is designed for easy and fast printing.
The angled face distributes forces when braking, pressing the holder down into the carpet to increase grip. The strap slot keeps a cargo strap from shifting while securing larger items.

Designed to be simple, strong, and quick to print.

Features

• Universal design for most carpeted car trunks
• Works with hook velcro strips
• Slot for cargo strap
• Bottle neck holder
• Strong ribbed structure
• Prints fast with no supports

Printprofile

• Layer height: 0.28 mm (draft profile works well)
• Infill: 5%
• Supports: None
• Standard 0.4 mm nozzle

Material
PLA works well in moderate climates.
For hotter environments (cars parked in the sun), PETG or ASA may be a better choice.

Required hardware

• 3 × hook velcro strips (20 × 100 mm)
  These are placed in the recesses on the bottom side.

Compatibility note
If you want to check whether your car is suitable for the velcro solution, simply test if the hook side of the velcro grips the carpet lining in your trunk. If the hooks catch in the fabric, it will work with this holder.