eufyMake E1_ Mini Flatbed Silicone Mould

Note: This is a mould, not the final product. You need to purchase the silicone！！！

注意：这是一个模具，不是最终成品，您需要购买硅胶！！！

The eufymake E1 uses visual positioning, which often results in ink overflow at the edges. UV ink printed on the platform is nearly impossible to remove. Although replaceable build plate films are available, the cost and the time required to replace them are frustrating; a silicone mat is a great way to avoid this.

「eufymake E1通过视觉定位，所以打印边缘经常会有溢出，打印在平台上的UV墨水几乎无法移除。虽然有可替换的打印平台膜，但是成本和实效性令人烦躁，硅胶垫能很好的规避这一点。」

My model based on the positioning holes, has added the display of the printing area. At the original position of the flatbed QR code, a slot has been reserved for placing an acrylic nameplate.

「我的模型在定位孔的基础上，增加了打印区域的显示，同时在原本平台二维码位置预留了一个可以放置亚克力铭牌的槽位。」

The mold has been split into two parts, so you can print it using machines with a 256×256 platform (such as the A1/P1S/P2S/X1C) without needing a large-format printer. Simply align and bond them with super glue. You can achieve the required seal for the mold very easily and quickly by applying single-sided tape or masking tape over the seams.

「模具已经分为两块，您可以使用A1/P1s/P2s/X1c等平台面积为256*256的机器打印，无需大平台机器，通过速干胶水对齐粘接即可。你可以通过在接缝处贴单面胶/纸胶带，从而非常简单，快速的达到模具所需的密封性。」

The remaining plates consist of positioning jigs in various sizes, which you can print as needed.

「其余打印盘是不同尺寸的定位件，您可以按需打印。」

Regarding the silicone, I personally recommend buying a relatively firm version, as it is easier to place and offers better durability. For the volume, I used approximately 300 ml / 10 oz (this is a redundant amount).

「硅胶个人建议购买相对较硬的版本，会更容易放置，以及有更佳的耐久度。用量方面，我使用了大约300毫升/10oz（这是冗余的量）」