Flashforge AD5M Top Mount Spool Adventure 5M

A simple and clean top-mount spool holder for the Flashforge Adventure 5M (AD5M) that installs without relocating the filament sensor and prints with no supports required.

This design relocates the filament spool to the top of the printer, improving the filament path while keeping the setup compact and tidy. A PTFE filament guide feeds directly into the Adventure 5M filament sensor, preventing sharp bends and helping ensure smooth filament feeding.

The mount installs easily using common hardware and the original screw that holds the PTFE tube guide, making installation quick and straightforward.

• No supports required
• No filament sensor relocation needed
• Top-mount spool position for cleaner filament routing
• Uses the original Adventure 5M PTFE tube screw
• Integrated PTFE filament guide for smooth feeding
• Quick and simple installation

Hardware Required:

• M2 × 2 screws (for mounting the bracket)
• Extra PTFE tubing for the filament guide
• Original Adventure 5M screw used to secure the PTFE tube

• Approx. 90g of filament
• Roughly 3 hours print time

Layer Height: 0.2 mm
Wall Loops: 2
Infill: 15%
Supports: None required

Installation Overview:

1. Print the parts using the recommended settings.
2. Mount the bracket to the top of the printer using M2 × 2 screws.
3. Insert the PTFE tube guide and secure it using the original Adventure 5M screw.
4. Add PTFE tubing to guide filament from the spool into the sensor.
5. Mount your spool and start printing.

Clip Assembly:

1. Apply glue between the 3 clip layers (smallest one in the middle)
2. Load your spool
3. Snap onto the end of the spool arm

Compatible With:
Flashforge Adventure 5M
Flashforge AD5M