March 19, 2026
Description
A fully parametric furniture riser for beds, couches, and desks. Choose from rectangular, circular, or half-circle shapes, then dial in the top dimensions, base taper, wall lips, and height to fit your exact needs. All three shapes share a consistent tapered base that adds stability without bulk.
Click Configure on the model page to open the customizer panel. Adjust parameters in each section, then click Slice to generate your personalized riser ready for print.
| Parameter | Description |
|---|---|
| shape | Rectangular, Circular, or Half Circle |
| base_extra | How much larger the base is than the top on each side (mm) |
| height | Total height of the riser (mm) |
| wall_thickness | Thickness of the lip walls (mm) |
| lip_height | How tall the lip stands above the top surface (mm) |
| Parameter | Description |
|---|---|
| top_width | Width of the top surface (mm) |
| top_depth | Depth of the top surface (mm) |
| edge_radius | Corner rounding radius (mm) |
| lip_front | Toggle the lip on the front edge |
| lip_back | Toggle the lip on the back edge |
| lip_left | Toggle the lip on the left edge |
| lip_right | Toggle the lip on the right edge |
| Parameter | Description |
|---|---|
| top_diameter | Diameter of the top surface (mm) |
| lip_cutout | Remove none, quarter, half, three quarters, or all of the lip ring |
| Parameter | Description |
|---|---|
| half_circ_diameter | Diameter of the curved end (mm) |
| half_circ_length | Length of the straight section from flat end to center of curve (mm) |
| half_lip_curved | Toggle the lip on the curved end |
| half_lip_flat | Toggle the lip on the flat end |
| half_lip_sides | Toggle the lips on both straight sides |
License:
Standard Digital File License
Scottj21
