March 24, 2026
Description
This tape holder holds tape rolls with a diameter up to 125mm. It is available in different widths from 100mm to 250mm (in 50mm steps).
You will need to print the parts Side_Left, Side Right and 4x the part Locking Pin. Depending on the width you need, print one of the Spacer_XXXmm parts as well.
To get a two-colored version, no AMS is required
No additional hardware or tools are required, simply line up the sides with the spacer of your choice with the help of the alignment pins. Then push in the 4 Locking holes into the respective holes until fully seated (example shown below.
License:
Standard Digital File License
2,379
MP Design
