3d Bulbasaur Oversized Card

Oversized 3d Pokemon card. 

Bulbasaur Full Art. 

9 different Colors used. Pause at set layer height to swap to only require 2 AMS units. Feel free to simplify colors to meet your set up. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 142.93x200mm in size

You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.52mm and the Actual Thickness is 2.52mm

    #080a0d PLA Bambulab Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #ffe17f PLA BambuLab Matte Lemon Yellow  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.92mm) swap to Blue Gray
    At layer #14 (1.24mm) swap to BambuLab Green
    At layer #17 (1.48mm) swap to Cyan
    At layer #20 (1.72mm) swap to Hot Pink
    At layer #23 (1.96mm) swap to Lemon Yellow
    At layer #27 (2.28mm) swap to Jade White for the rest.
 

Bulbasaur model used Ziro Glacier Matte PLA Gradient, Bambu Olive Green, and Red.