Glasses Holder Wall Mount (Adhesive)

🚨 V2 UPDATE AVAILABLE - NOW 100% SUPPORTLESS! 🚨
I’ve uploaded a massive upgrade to this design. V2 has been completely re-engineered with 45-degree angles and chamfers so it prints entirely without supports. No more wasting filament on giant tree supports! Both the Wall-Mount and Drawer-Hook versions are combined into one page.

👉 Get the upgraded V2 here

This is the wall-mountable version of my glasses holder. Same design, just without the drawer hook so you can stick it anywhere using double-sided tape or 3M strips.

I use it in my bathroom so I have a safe spot to park my glasses when I shower. No drilling, no screws, just stick it to the wall and done.

The flat back gives a good surface for adhesive tape. I tested it with 3M 9448A double-sided tape, works well on a smooth wall.

Print settings (also included in the profile):

• Infill: 15% Gyroid
• Supports: Tree Auto, build plate only
• Brim: Outer only, 3mm

Print time: ~1h 24min (on P2S)
Filament: ~54g

Also check out the drawer hook version if you need something for inside a drawer.