Conspit CPP Apex Pedal Face Set

I like to do sim racing wearing socks, not shoes. 

But Conspit CPP APEX's stock pedal face doesn't work very well for me.

Problems and my solutions:

• Flat pedal face, even if it has holes to help friction, still feels slippery. 
  • Changed to curved and with friction pattern. 
• Pedal Arm is short, hence pedal face is too low. My 8.5 sized feet's main compression spot, barely stay at the top edge area of the pedal face.
  • Longer pedal face.
• Even if the pedal face angle is adjustable, the angle is still not good enough for me.
  • Added 5 degrees of angle to the angle face.

Note 1:

I recommend to use 90~100% fill with PETG material to print. Very much indestructible. 

But if you want to save some material, I've also tried 8 walls + 10% fill, works fine for brake and clutch pedal, but I'd recommend a bit mor e for the long throttle pedal face.

Note 2:

Stock screw is too short for this pedal face, please buy some M5x12mm screw.