This version is a refined iteration of the mounting system, specifically optimized for better camera clearance and high-strength performance using updated slicing parameters.
Key Design Features
- Extended Mounting Prongs: The prongs are lengthened to ensure camera housings or media mods can sit flush against the mount without interference.
- Reinforced Support Base: The extended body increases the surface area in contact with the Klickfast dock, providing more leverage to support the camera and reducing vibration.
- Integrated Nut Trap: One prong includes a reinforced hex-shaped recess to secure an M5 nut, preventing rotation when tightening the thumb screw.
- Maximum Tilt Range: Moving the pivot point further from the base allows for a full range of motion, which is ideal for chest-mounted setups.
Structural Print Orientation
- 45-Degree Angle: The model is intended to be printed at a 45-degree tilt.
- Shear Strength: This orientation ensures that the layer lines run diagonally through the prongs and the base, preventing the part from snapping along a single horizontal plane during use.
Build Details
- Infill: 50%
- Sparse Infill Pattern: Grid
- Wall Loops: 4
- Supports: Tree Hybrid (Build plate only)
Post-Processing Recommendation
- Surface Protection: It is recommended to apply a small piece of adhesive foam tape to the face of the mount. This prevents the camera screen from contacting the plastic directly, protecting it from scratches and providing extra grip to keep the camera secure.
Boost MeIf you like my models please leave a boost.
SpaceMaster
