The Joker

Project: Joker.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #8c69b5 PLA Overture Matte Purple  Transmission Distance: 0.7
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #eb3b41 PLA Overture Matte Red  Transmission Distance: 2.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Purple
    At layer #13 (1.12mm) swap to BambuLab Green
    At layer #17 (1.44mm) swap to Red
    At layer #23 (1.92mm) swap to White for the rest.

 

If you are only able to do 4 color then just add a pause at layer 23 instead and manually switch the real 

 

Boost Me