WobbleZoo

Welcome to WobbleZoo 

These tiny animals are powered by vibration and start moving as soon as you move the slider.
No wheels, no legs – just pure wobble motion!

 

Boost Me

Features:

• No supports required
• Easy to print
• A1 Mini compatible
• Only a few parts
• Fun desk toy
• Unique movement mechanism

Each animal has its own personality and movement style.

 

Assembly Instructions – WobbleZoo

• First, slide the motor into the opening. Make sure you still have enough cable length available.
• Then insert the PCB and solder the wires. In general, it does not matter if you swap + and −. It will only change the rotation direction of the motor and therefore the movement direction of the animals.
• Once everything is soldered, place the slider onto the switch.

• After that, you can glue on the cover. Make sure not to accidentally get any glue on the slider. It’s best to leave the top part of the slider free of glue.

  I only applied four small dots of glue.

Parts:
https://www.amazon.de/dp/B0F42P63PW
https://www.amazon.de/dp/B0F4QJGLNR
https://www.amazon.de/Amazon-Basics-CR2032-Lithium-Knopfzellen-6er-Packung/dp/B08J4QR18R