Toronto Raptors

Project: Toronto raptors.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #eb3b41 PLA Overture Matte Red  Transmission Distance: 2.5
    #74777d PLA Overture Matte Light Gray  Transmission Distance: 0.3
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #17 (1.44mm) swap to Light Gray
    At layer #23 (1.92mm) swap to White for the rest.

 

Boost MeGive it a like and a boost, it really helps me out thank you