H.C. Range Rover Truck SCX24/Redcat 20 Degree skid

HC Range Rover Truck with a 20 degree skid angle. Put wood in from bottom, it is form cut to be slightly lower than the bed top, then run a thin bead of E600 or alike along the whole seam underneath. Bed is fragile from printing vertically to match Cab (until “wood” is installed). 4x M1.4 or M1.6 screws needed for attaching Cab to Bed. Bed center and Hood center are best for magnet locations. .2 nozzle is recommended if you want the lettering to be crisp.