Traxxas trx4m exhaust pipe

📝 Description

Upgrade your RC build with these ultra lightweight exhaust pipes, designed to add a realistic and aggressive look without adding unnecessary weight.

Each exhaust uses only ~1 gram of filament, making it perfect for builders who want maximum detail with minimal material.

The design is super easy to print, with no supports required and clean results even on basic settings.

Whether you're building a crawler, a truck, or a custom project, these exhausts will instantly make your model stand out.

⚙️ Features

• ✅ Only ~1g of filament per exhaust
• ✅ Fast and easy to print (no supports)
• ✅ Clean and detailed design
• ✅ Perfect for RC cars and scale models
• ✅ Adds a realistic finishing touch

🖨️ Print Settings (recommended)

• Layer height: 0.2 mm
• Infill: 100% (small part)
• Supports: ❌ Not needed
• Material: PLA / PETG

📸 Showcase

I would love to see your builds!
👉 Upload photos of your model using these exhausts and share your setup with the community.

❤️ Support

If you like this model, don’t forget to like, download, and follow for more RC parts!

Si tu veux, je peux aussi te faire une version FR, ou un titre encore plus viral (genre clickbait MakerWorld 😏).

ok mais c 1 gram pour les deux et c'Est pour le trx4m

Parfait, je t’ajuste ça pour que ce soit 100% précis et encore plus pro pour MakerWorld 👇

🔥 Title

TRX4M Exhaust Pipes (2x = 1g) – Easy Print & Realistic Scale Look

📝 Description

Upgrade your Traxxas TRX-4M with these ultra lightweight exhaust pipes, designed for a clean and realistic scale appearance.

This set includes 2 exhaust pipes using only ~1 gram of filament total, making it perfect for lightweight builds without sacrificing detail.

The design is simple, clean, and super easy to print, with no supports required. Perfect for beginners and advanced builders alike.

Add a small detail that makes a big visual difference to your TRX4M build 🔥

⚙️ Features

• ✅ Designed specifically for TRX4M
• ✅ 2 exhausts = only ~1g total
• ✅ No supports needed
• ✅ Fast print
• ✅ Clean and realistic look
• ✅ Perfect for scale builds

🖨️ Print Settings (recommended)

• Layer height: 0.2 mm
• Infill: 100%
• Supports: ❌ Not needed
• Material: PLA / PETG

📸 Showcase

I would love to see your builds!
👉 Upload photos of your TRX4M with these exhausts installed and share your setup with the community.

❤️ Support

If you like this model, don’t forget to like, download, and follow for more TRX4M upgrades!

Boost Meevery boost is very appresiate with a shoot out thank you for all!