DIY Monitor Light Bar V2 – Under 60g

🔹 DIY Monitor Light Bar V2 – Under 60g

Upgrade your workspace with the DIY Monitor Light Bar V2, a lightweight and modular 3D-printable mounting system designed to provide clean and effective desk illumination. Weighing under 60 grams, this design uses a counterweight-based mechanism to securely mount the light bar on top of your monitor without the need for adhesives or permanent modifications.

The model includes mounting options for both slim and thick monitors, making it versatile and easy to integrate into any desk setup. Optimized for FDM 3D printing, the parts are simple to print and assemble.

✨ Key Features

• ✅ Ultra-Lightweight – Total printed weight under 60 grams.
• ✅ Counterweight Mount – Stable and secure without damaging the monitor.
• ✅ Supports Slim & Thick Monitors – Two mounting variations included.
• ✅ Modular Design – Easy to print, assemble, and customize.
• ✅ FDM-Friendly – Prints with minimal supports.
• ✅ Clean & Minimal Aesthetic – Perfect for modern desk setups.

📦 Included Parts

1. Light Bar Body
2. Diffuser
3. Mount for Slim Monitors
4. Mount for Thick Monitors

🔩 Hardware Requirements

• M3 Screws (3mm diameter) – 4 pieces (recommended length: 8–12 mm).
• LED Strip – Optional, depending on your lighting setup.
• Glue (Optional) – If needed, use a small amount of glue to secure the diffuser in place.

🖨️ Recommended Print Settings

🧵 Suggested Materials

🛠️ Assembly Instructions

1. Print all components: Light Bar, Diffuser, and the appropriate mount (Slim or Thick).
2. Insert the LED strip into the light bar housing.
3. Attach the diffuser to the bottom of the light bar.
   • If the fit is loose, apply a small amount of glue to secure it.
4. Assemble the mounting bracket using 4 × M3 screws.
5. Add additional weight to the counterweight if necessary (e.g., coins or metal pieces).
6. Place the assembly on top of your monitor and adjust the position for optimal lighting.

📏 Compatibility

• ✔️ Slim bezel monitors.
• ✔️ Thick-back monitors.
• ✔️ Ideal for 24"–34" displays (depending on counterweight).

⚠️ Notes

• Ensure the LED strip does not exceed recommended temperatures when using PLA.
• PETG is recommended for better heat resistance.
• Use minimal glue to allow future maintenance if needed.