Metallica 3D Sign with Stand

Metallica Sign I built in Fusion and wanted to share.  The sign has different layer heights throughout it to give it a little 3D look.

The sign is all print in place.  I printed this on the H2C and there is plenty of room to scale up on the H series printers.  If you decide to scale it up, just scale the X and Y the same and leave the Z as is (make sure you scale the stand the same way).  It's a tight fit on the A/P/X series but should print without any issues.  I wouldn't scale it down much more as you might loose some of the smaller details.

You can also customize the colors a little bit by going to the Object Tab in the slicer and assigning filament to the different objects.

I plan on making more so if you have anything you want let me know and I will work on it when I have some extra time.

Thanks and happy printing - Rock On   \../