Shower 1" Pole Support Clip

Shower Caddy Pole Support Clip

 

No Supports needed to print

 

When one IS NOT enough!

 

When you need more stability but the manufacturer only supplies one clip.

And any extras are not available for purchase!

 

 

 

Helps to stabilize shaky poles!

 

This was designed to hold the pole off the wall same distance as the clip supplied with the caddy.

If you wish to have the clip hold the pole further out, then don't fully screw the clip into the base.

Just be wary that you engage enough for adequate support. 

I may add extra profiles to give extended threads on the clips.

 

So if you are interested or need the longer threads, then just post a reply or send me a message. 

 

You have different options to attach the clip to the wall. 

From the removable wall tape strips to just using mounting tape.

 

I used 3M 4910  1" mounting tape and just applied then cut to size.

As you saw in the installed picture it is clear, 1mm thick and did hold it secure.

If you print the clip in white or other colors then the clear mounting tape won't provide any advantage.

 

https://www.amazon.com/dp/B0DJM3MMPH

 

Boost MeIf you find this item to be of use and you happen to have any boosts getting ready to expire, please consider not letting them go to waste. Any would be greatly appreciated. Thank you for your views, downloads and prints.