Saw Holder - French Cleat

Saw holder with French cleats with narrow slots for dovetails/ fine woodworking saws. The slots are .125"W x 2.6"L. 

Uses hidden dovetails for a clean appearance. Fit requires light pressure. The print profile should produce a nice fit, but use a dab of glue on the dove tails if you feel the fit is too loose. Results do vary based on machine calibration. 

French cleat is .7" (17.8mm) deep. The French cleat must be deeper than this value (a typical 3/4" plywood is .72" thick and works well).