Drilling Rig

Project: Drilling Rig.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #1b6397 PLA Overture Matte Blue  Transmission Distance: 0.5
    #ff7238 PLA Prusament Prusa Orange  Transmission Distance: 6.6
    #fce300 Overture Yellow Transmission Distance: 6
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 5 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue
    At layer #12 (1.04mm) swap to Prusa Orange
    At layer #20 (1.68mm) swap to Yellow
    At layer #23 (1.92mm) swap to White for the rest.

 

If you only have 4 Color AMS you can add a pause and swap colors out manually as i do, there should already be a pause added to in the file 

 

Boost MePlease give it a boost and a like really helps generate more people to my page. If you're looking for more hueforges check out my page and give it a follow