This is a lift for Walmart chip shelves. Was requested to find a solution for the shelf continuously breaking. This is it.
Required parts
Assembly Instructions
- Print the parts.
- need 2 clamp faces, one of everything else.
- shelf lift isn't used much, can be used for mismatched shelve heights.
- Put the M2 washer in to the clamp faces
- install the M5 nut into to the hex hole, install the screw on the outside.
- Put the clamp faces into the hex hole, use the M2 screw to lock it into place.
- M5 screw will be used to clamp unit down.
Seamortal
