Skadis pegboards for artist alley grid walls

Boost MeBoost me, if you like my pegboard design.

These pegboards are compatible with the IKEA Skadis system and can be combined with grid walls with a wire diameter of ~3.8 mm and a grid size of ~30 x 30 cm. All pegboards can be printed on a 256x256 mm print bed, i.e. you can use the A1, X or P series. I recommend to print with PLA. PETG can be used but you need very good bed adhesion because the model is prone to warping due to its size.

 

For one full board you need to print two print plates with a total of four parts. When finished, you can simply press-fit the parts together (see pictures). If you have an AMS, there is also one full board with a two-colored star pattern.

 

In addition, there is a half sized board available.