Peterbilt

Project: Peterbilt.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #eb3b41 PLA Overture Matte Red  Transmission Distance: 2.5
    #bf9b30 PLA Protopasta Good as Gold  Transmission Distance: 5
    #a6a9aa PLA BambuLab Basic Silver  Transmission Distance: 0.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Red
    At layer #12 (1.04mm) swap to Good as Gold
    At layer #17 (1.44mm) swap to Silver
    At layer #23 (1.92mm) swap to White for the rest.

 

I have added a pause into the file for people with only 4 color options for printing if you have more just take the pause out and have a color switch in there 

 

Boost MePlease give it a boost and a like really helps generate more people to my page. If you're looking for more hueforges check out my page and give it a follow