MTG Vault Box – All-in-One Commander Deck Storage

MTG Vault Box – All-in-One Commander Deck Storage

Take your Magic: The Gathering setup to the next level with the MTG Vault Box—a premium, all-in-one storage solution designed for Commander players who want everything in one place.

Built with both function and presentation in mind, this hinged deck box opens to reveal a fully organized interior featuring the iconic MTG logo on the inside lid. The magnetic closure keeps everything secure, while still allowing quick, satisfying access when it’s time to play.

The Vault Box comfortably holds a full 100-card Commander deck, whether single or double sleeved, and includes four removable storage containers—perfect for keeping your dice, tokens, counters, or other game accessories neatly organized and within reach.

Features:

• Holds 100-card Commander deck (single or double sleeved)
• 4 removable accessory trays for dice, tokens, counters, etc...
• Hinged lid with strong magnetic closure
• Clean interior display featuring the MTG logo
• Designed for both storage and tabletop use

Whether you’re heading to game night or upgrading your display setup, the MTG Vault Box keeps everything you need protected, organized, and ready—just like a vault should.

 

Materials Needed:

8x2mm magnets -  Amazon link - magnets

Your Glue of choice. I prefer to use:

     Stick Fast CA Adhesive Amazon link - glue

     Mitreapel AC400 activator Amazon link - activator

 

Filament:

Bambu Lab PLA Basic Black

Bambu Lab PLA Basic Red

Bambu Lab PLA Basic Sunflower Yellow

Bambu Lab PLA Basic Jade White

 

Printing Profiles:

This was printed on the X1C and H2D. AMS needed for the lid. 

 

Assembly Instructions:

The magnets are glued into place. Make sure your magnets are placed correctly! It's easy to accidentally flip one when gluing it into place in the opposite piece. To avoid mistakes, I typically glue all of the magnets into the deck box first. Then just put the opposing magnet on top of the magnets you just glued into place. Use something like a sharpie or other method of marking the top of the magnet so it's easy to identify which side needs to be place into the whole in the lid. Doing them one at a time avoids mistakes....so I've heard...because this has never happened to me....ever.... ;)
The hinge pin is just a piece of standard Bambu Lab PLA Basic Black filament. I slide a piece through and leave about 1/8" (3.175mm) sticking out of each end. Then I use a soldering iron with a flat tip to melt the solder towards the hinge creating a flat button (kind of like a nail or screw head). I do this on both ends to prevent the filament from sliding out.

 

Support me with a boost!

Boost MePlease consider boosting me if you enjoy this model! I appreciate the support!