Customizable Geometric Stick Candle Holder

Add a colorful touch to your space with the customizable geometric candle holder.

Only use real candles for decorative purposes with the candle holder. Do not light them!

It is recommended to use LED candle sticks. 

The following parameters can be customized:

• Frame Dimensions: Adjust the height, width, depth and wall thickness of the frame. The diameter of the edges can be changed using the FilDiam value. 
• Sleeve Fit: Change the sleeve diameter, sleeve height and sleeve thickness to perfectly match your specific candles. A 0.2 mm clearance is automatically added to the sleeve diameter. 
• Sleeve Positioning: Adjust the spacing between the sleeve and the frame edge for a centered or offset look by changing the Spacer value

Recommendend print settings:

Setting the top and bottom surface pattern to concentric is recommended for the best look. Enable tree supports to print the sleeve. 

Assembly:

The candle sleeve screws directly into the frame. This allows you to mix and match colors between the frame and the sleeve easily, or even print different sleeve sizes for the same frame! The tolerance of the thread is 0.2 mm. If you require a higher tolerance, please let me know and I will adjust the model accordingly.