Flip Phone Slider + Flip Fidget Toy (~36 min)

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance (do not over twist), then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

📱 Call Me, Beep Me, Fidget Me

Throw it back to the golden age of dramatic hang-ups with this old school flip phone slider + flip fidget. Flip it, slide it, twirl it, rotate it, twist it, and snap it shut like you just ended a very important 90s call. Whether you remember T9 texting or just appreciate the satisfying flips, this one is pure nostalgia in your pocket.

This quick print-in-place design comes together in 2 colors in about 36 minutes—faster than dialing someone on a rotary phone. Perfect for reliving the days when closing your phone meant conversation over. No signal required… just good vibes and better fidgets. 📞