Flash - Pikachu No AMS (Multiparts)

Boost Me⚡ If you like this model, a free Boost would really help support my work and future creations. Thank you for your support! ⚡

 

⚡ Flash Pikachu ⚡

Bring the fastest Pikachu to your collection! This Flash-inspired Pikachu is designed to be cute, easy to print, and simple to assemble.

• Prints well with almost any material
• Easy printing and beginner-friendly assembly
• Most parts snap together without glue
• Current assembled size is approximately 125 mm tall
• Can be scaled down by around 30%
• Can be scaled up almost unlimited, but larger sizes may require glue due to looser tolerances

Assembly is straightforward, especially if you have built my previous models before. Most parts are labeled directly on the print plates. If you click on a part in Bambu Studio, it will show which piece it is.

Eye assembly:

• pt1 = yellow eye base
• pt2 = black eye piece
• pt3 = white pupil

Assemble them in that order:

1. Insert the black piece into the yellow eye part
2. Insert the white pupil piece

Recommended colors:

• Ear wings
• Center logo
• Belt
• Hand bracelets

These can be printed in yellow or PLA Silk Gold. I personally used PLA Silk Gold for those parts.

Important assembly notes:

• There is a rectangular center joint piece that connects the upper body, lower body, and belt
• Hands connect using cylinder joints
• Every part has a matching connector and placement, so assembly is very intuitive

If any connection feels too loose or too tight, try scaling the affected part up or down by 2–3% depending on your printer tolerances.

Glue may or may not be needed depending on your printer calibration and tolerances.

You can assemble the model by following the listing pictures. I may upload detailed assembly instructions later if needed.

If you run into any issues during assembly, please feel free to comment before leaving a negative review — I’ll do my best to help as soon as possible.

The model printed perfectly on my printer, but I cannot guarantee identical results on every machine.

 

Checkout my other models 

Spiderman Pikachu No AMS Multiparts

https://makerworld.com/en/models/2456840-pikachu-spideman-man-no-ams-multiparts#profileId-2697541

Deadpool Pikachu No AMS

https://makerworld.com/en/models/2485112-deadpool-pikachu-no-ams-required-multiparts#profileId-2729968

Pikachu Captain America No AMS

https://makerworld.com/en/models/2425783-pikachu-captain-america-no-ams#profileId-2660601

 

Pikachu - Venom  NO AMS (Multiparts)

 

https://makerworld.com/en/models/2447772-pikachu-venom-no-ams-multiparts#profileId-2686930

 

Iron Pikachu (Cute Iron man Pikachu) No AMS needed

https://makerworld.com/en/models/2404257-iron-pikachu-cute-iron-man-pikachu-no-ams-needed#profileId-2635453

 

Cute Thor Pikachu No AMS needed

https://makerworld.com/en/models/2148801-cute-thor-pikachu-no-ams-needed#profileId-2614654

 

Hulk Pikachu No AMS Multiparts

https://makerworld.com/en/models/2514990-hulk-pikachu-no-ams-multiparts#profileId-2766223

Ant Man Pikachu No AMS multiparts 

https://makerworld.com/en/models/2510746-ant-man-pikachu-no-ams-multiparts#profileId-2761124