Out of the Frame – Carnage Outbreak

Out of the Frame – Carnage Outbreak

Chaotic Carnage violently erupting from his ornate frame in the Out of the Frame collection. Multiple symbiote tendrils wildly spreading in all directions while his monstrous upper body lunges forward with jaws wide and a thick tongue lashing out... pure symbiote madness breaking through reality. Integrated keyhole hanger on the back for easy wall mounting.

Print profiles

I sculpted all the thin tendrils thick enough so they won’t break easily, but there are still plenty of supports. Remove them carefully, don’t just yank them off. Instead, cut between the branches and use thin nose pliers if possible. One area failed during my first test print, so I painted more supports and tweaked the settings to make the print more reliable. I also applied filament overrides to reduce the chances of the nozzle knocking over supports, so I recommend using them.

100mm

• Layer height: 0.12 mm
• Walls: 2
• Infill: 10% Gyroid (infill combination enabled)
• Supports: Tree (auto) and painted, support wall loops 2, initial layer expansion 5mm
• Fuzzy skin (on variant): point distance 0.2 mm, thickness 0.1 mm

Plates

1. 100mm
2. 100mm fuzzy skin

150mm

• Layer height: 0.16 mm
• Walls: 2
• Infill: 5% Gyroid (infill combination enabled)
• Supports: Tree (auto) and painted, support wall loops 2, initial layer expansion 10mm
• Fuzzy skin (on variant): point distance 0.2 mm, thickness 0.1 mm

Plates

1. 150mm
2. 150mm fuzzy skin

Before the madness… there was the rage. From the same symbiote bloodline that gave birth to this chaos, came the original… the one who first broke through. Venom Breach! The shadow that started it all. Grab it here 👇