May 25, 2026
Description
Do you own a camper or a van with a Fiamma awning and need extra mounting points to hang lights, privacy screens, or organizers? This 3D printable clamp is the perfect solution!
Designed to fit perfectly onto the awning profile without scratching or damaging it, providing a firm and secure hold for all your camping accessories.
Since this object will be used mainly outdoors in the sun, I strongly discourage using PLA (it risks warping under summer heat).
| Parameter | Recommended Value | Notes |
|---|---|---|
| Material | PETG, ASA, or ABS | ASA is ideal for maximum UV resistance. |
| Layer Height | 0.20 mm | Great balance between speed and strength. |
| Wall Loops | 4 - 5 | Essential for providing mechanical strength to the clamp. |
| Infill | 25% - 40% | Gyroid or Grid for optimal strength. |
| Supports | No / Only where indicated | Designed to print easily without supports (orient on its side). |
If you print this model, please upload a photo of your camping setup and leave a review! It helps me a lot to improve the design. If you have suggestions for other useful accessories for campers and vans, let me know in the comments!
Happy traveling and happy printing! 🚀🏕️
License:
BY-NC-SA
Teseo
