Earthworm Jim - (Multipart, No AMS)

Earthworm Jim - (Multipart, No AMS)

Groovy! Bring the nostalgic charm of the 90s video game classic right onto your desk!

Boost MePlease consider giving me a Boost! I’ve invested a lot of time, energy, and many test prints into perfecting this design to ensure it’s ready for you to enjoy. Your support means the world to me!

 

This highly detailed model captures Earthworm Jim in his iconic super-suit, armed with his plasma blaster and ready to save the galaxy.

Designed specifically to bring out the pure, colorful essence of the original game artwork, this model looks like official merchandise—without requiring any paint!

 

No AMS? No Problem! (Multipart Design)

This model is completely optimized for every single Maker, regardless of your hardware setup:

• Print by Color: Every section (the worm head, the blaster, the gloves, stripes, and suit details) is separated into individual files.
• Zero Waste: No multi-color switching means zero filament poop and fast print times!
• Perfect Fit: Engineered with tolerances so everything slots together beautifully. A comprehensive, step-by-step assembly manual is included.

The figure measures 23.5 cm in height when fully assembled. With Jim on the Base its 24.9 cm in height.

My New Junk City Base:

 

Check out my Multipart Models!:

Monkey D. Luffy Gear 5 transformation 

Cute Halloween VOL1:

Cute Halloween VOL2:

Cute Cows

Please read before printing:

This model features fine details and delicate structures.
Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion.
Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated.
Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set.
For more tips on this topic, check out this video on YouTube. video (Youtube).

 

Print Recommendation:

I recommend printing this Models with the orignal intendet Print Profil: [original] variable layers, optimised settings.
This includes a layer height of 0.12 mm and some parts (head, eyes, etc.) with variable layer height to 0.08 mm and hidden seams. The variable layer height and hidden seams is already set in the 3MF file.

 

Prints with different layer heights are sorted onto different printing plates, despite sharing the same color.

 

Support Structures:

Be careful when removing the support structures to avoid breaking.

 

Additional supports have been added to minimalize the risk of print errors.

 

Brim is enabled in for increased print stability.

The Design and my Print Profil is designed with minimal but necessary supports.

 

Assemble:

Included is a highly detailed, step-by-step assembly manual to download. 

For assembly, I recommend using PLA glue or plastic glue, preferably a fast-drying one.
I personally use German super glue. It dries within a few seconds and creates a very strong bond.

 

Check out my other Models!