Buc-ee Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Basic Brown
    At layer #10 (0.88mm) swap to BambuLab Basic Red
    At layer #15 (1.28mm) swap to BambuLab Basic Yellow
    At layer #22 (1.84mm) swap to Default White for the rest.