Akro-Mils sells dividers separately, so this is a free way to split a drawer into two compartments without buying a pack, or cutting off the back pieces of the cabinet.
Fit
- Slide into the divider channels molded into the drawer slots.
- Single-row width only!
- Use both thumbs to press it in all the way.
Printing
- Material: PETG (helps with flexing).
- No supports needed!
- Less then 20 minute print time!
- To mimic the look of the original trays, use transparent PETG, 100% infill, print slowly, and in the same direction for each layer (aligned rectilinear).
- See the dedicated Print Profile for the exact settings I used.
Printed and tested on a Bambu Lab A1 Mini.
3Deto
