A2L Print Head Drag Chain (Print-in-Place)

This is a Print-in-Place drag chain for the A2L toolhead cable.

 

No complicated assembly work is needed. All you need to do is:
1. Attach both mounting ends on the X-axis motor shell and Toolhead.
2. Connect the two segments.
3. **Gently bend each joint inward** to make the chain flexible and ready to use.
4. Finally, guide the cable into the chain. And connect to drag chain on the mounting ends.

(Due to the total length of the drag chain, it is split into two segments on the print plate. )

 

Drag Chain for Z-Axis

 

Boost MeDo you like this Print-In-Place drag chain? Boost me for more interest model!