Nemesis Modular Card Holder & Display System (Magnetic)
Surviving the Intruder infestation on the Nemesis requires strategy, nerves of steel, and an organized tabletop. Stop letting your card decks drift around the board like a broken escape pod. This Modular Card Holder and Display System is designed to keep your Nemesis game state pristine, your cards accessible, and your table immersion-level at an all-time high.
- Fully Modular: Print as many as you need. Keep Serious Wounds separate, your contamination contained or display your Event draft cards.
- Magnetic Locking: Every module features slots for 6×2 mm round neodymium magnets. They click together with a satisfying snap, ensuring your deck display won't slide apart when the ship goes into self-destruct mode.
Print settings
- Nozzle: 0.4mm standard
- Layer Height: 0.2mm works perfectly (0.16mm if you want those slopes extra smooth).
- Infill: 15% Gyroid (provides great structural integrity for minimal filament).
- Supports: None required! This model is optimized to print clean right off the build plate.
- Magnet Note: Make sure to check your polarities before gluing the 6×2 mm magnets into place so all your modules snap together in any configuration!
Support the mission.
Developing, prototyping, and dialing in tolerances to get that perfect magnetic click takes a lot of time and filament. If this upgrade saves your tabletop from chaos, please consider supporting the work:
- 🚀 Drop a Boost! It helps fuel the printer for future Nemesis and board game upgrades.
- ⭐️ Leave a 5-Star Rating & Share your Makes! Seeing your prints on the table keeps this work going.
Disclaimer: Does not protect against unexpected Intruder attacks.
crewdragon
