OpenConnect Scrub Daddy Holder

Holds a standard size Scrub Daddy or Scrub Mommy with OpenConnect for the OpenGrid ecosystem.

Required parts

• Holder Bin: open_connect_scrub_daddy_holder.3mf
• Drip Tray: drip_tray_mesh.3mf
• 2x OpenConnect snaps of choice
• OpenGrid

Printing Instructions

For the holder bin, print as normal.  I used 15% infill and 2 perimeters.

For the drip tray, print with 0 top and bottom layers and desired infill.  This will allow it to drain water below for evaporation instead of keeping the sponge moist.  I used 15% honeycomb infill.