Customizable 3D Layered Text - All Connected

🔧 Custom Layered Text Generator — Clean, Fast, Support‑Free

This model is a fully parametric, multi‑layer text generator engineered for creators who want sharp lettering, perfect alignment, and reliable multicolor printing. Every component- main text, overlay text, borders, underline, and base layer is automatically connected and synchronized through the underlying code structure. Change one parameter, and the entire model adapts instantly with zero manual adjustments.

The geometry is optimized for support‑free printing, strong vertical bonding, and a premium tactile feel. Whether you're making a single nameplate or producing batches for customers, this generator delivers consistent, professional results.

🛠️ What can you customize?

✏️ Custom Text & Fonts - Add any main word plus an overlay text using built‑in dropdowns that access all installed system fonts. Perfect for mixing bold, condensed, script, or cursive styles.

🧱 Custom Borders & Sizing - Apply a precise outline to your main text and independently adjust thickness, size, and letter spacing for both layers. The border is generated using automated offset logic, ensuring clean edges and perfect proportionality.

📏 Dynamic Underline - Enable a smart underline that automatically scales to the length of your main text. Fine‑tune its width, gap, and extra length using intuitive sliders. The underline stays perfectly aligned thanks to the parametric length calculation.

🎯 Position Control - Shift the secondary text exactly where you want it using X/Y offset sliders. The model recalculates all connections automatically, keeping layers perfectly stacked and bonded.

🎨 Easy Multicolor Base Layer - Activate the Base Layer to generate a uniform bottom surface (e.g., 4 mm) across the entire model. This makes filament swapping in your slicer extremely easy — ideal for two‑color or three‑color prints.

⚙️ Automated Parametric Structure

The generator uses a fully modular code architecture:

• Each text layer is built as a 2D module
• Borders, offsets, and underlines are computed from text length and font size
• Base, middle, and top layers share unified Z‑height logic
• All positioning is handled through synchronized translation modules

This ensures every part stays perfectly connected, no floating elements, no misalignment, no manual tweaking. Change the text, size, font, underline, or offsets, and the entire model updates instantly.

🖨️ Print Settings (and Multicolor Guide)

This model is designed to be printed flat on its back, with clean edges and perfect layer transitions. You do not need an AMS to print this in two colors.

🧵 Material - PLA, PETG, Matte PLA (matte white + matte black give a beautiful, high‑end contrast)

🧱 Infill - 10%–15% is more than enough.

🧱 Walls - 2 or 3 walls for optimal strength.

✨ Top Surface Finish - Enable Ironing on the highest top surface for a smooth, professional finish on the text.

🎨 Color Swap (Manual Multicolor)

Slice the model normally, then add a Pause at the exact layer where you want to change the color

Swap filament (e.g., white → black), resume printing, and the generator’s unified base layer ensures a perfect color break.

❤️ Share Your Makes

Every print carries a little piece of you — the idea you had, the moment you made it real. If this model became something uniquely yours, share your makes. Upload your photos and let the community feel the story behind what you’ve created.