July 3, 2026
Description
MH-53E taking off
The HueForge settings were
Project: MH53E - 3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 280x186.67mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#37b6e2 PLA Kexcelled Sky Blue Transmission Distance: 2.6
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Grey
At layer #18 (1.52mm) swap to Sky Blue
At layer #20 (1.68mm) swap to White for the rest.
License:
BY-NC
Lilabye
