Gravity_hook/重力抓钩 kitcard_version & separate parts

Update：更新独立分开的无框架的构件，可以直接使用。

把一款重力挂钩做成了3D打印的版本。
当作玩具或者用来挂载重量不太大的物品都是可以的。

具体承载力没有测试过。

推荐使用PETG材料打印。

销钉可以用金属材料来替换，但是要注意调整松紧度，适当的松紧度可以保证重力夹持的成功率。

如使用金属螺丝，螺母部分应当涂胶固定。

打印销钉易损坏，后期会上传单独文件便于替换。

组合成为十字挂钩的面板上的开孔刻意做得小一些，使其固定更加紧密。

十字挂扣状态下的卡扣易折断，后期也会上传单独文件便于替换。
更简单的方法是使用弹性材料，如皮筋等直接捆绑起来。

__________________________________________________________
Update: Updates separate frameless parts for direct use.
 

Made a 3D printed version of a gravity hook.
It's fine to use as a toy or to hang items that don't weigh too much.

The specific load capacity has not been tested.
Recommended to use PETG material for printing.

The pin can be replaced by metal material, but be careful to adjust the tightness, the proper tightness can ensure the success rate of gravity clamping.

If metal screws are used, the nut part should be glued.

Printed pins are easily broken and a separate file will be uploaded at a later date for easy replacement.

The holes in the panels that are combined to form the cross hooks are intentionally made smaller to allow for a tighter fixation.

The clips in the cross-hooked condition are easily broken and will be replaced in a separate document to be uploaded at a later date.
A simpler method is to use an elastic material, such as a leather strap, to bind it directly.