Fallout Nuka Cola (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
 

PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5

 

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.

 

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.

 

blue jumpsuit https://makerworld.com/en/models/831273#profileId-775711

improved version https://makerworld.com/en/models/2231425-fallout-nukacola-v3-improved-version#profileId-2427863

 

Boost MeBoost Me (for free)

Dir gefällt mein Modell?
Dann würd ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr freuen. Vielen Dank

Do you like my model?
Then I would be very happy if you supported me with a free boost token. Thank you very much