Dummy 13 Camera mode

I wanted an interesting camera to monitor the working status of my 3D printer, so I learned from the lamp model of Teseties@Teseties_819911 (https://www.printables.com/model/656603-dummy-13-lamp-mode). So I bought a 42mm diameter WIFI camera and created the model. I designed the cover and shell to be threaded to facilitate the removal of the camera, and slotted the power cord connection hole, and modified the aperture of the backpack to facilitate the passage of the USB cable.

我想要一个有趣的摄像头来监控我的3D打印机工作状态，于是借鉴了Teseties@Teseties_819911大神的灯具模型（https://www.printables.com/model/656603-dummy-13-lamp-mode）。于是我购买了一个42mm直径的WIFI摄像头，并进行了模型创作，我将盖子和壳身设计成了螺纹连接方便摄像头的取出，并开槽了电源线连接孔，修改了背包的孔径方便USB线的穿过。

The diameter of the camera is recommended to be 44mm-40mm circular. The camera has problems with the definition of 1080p version. I attach the purchase connection and the picture quality, and you decide for yourself! The author does not take any responsibility for the poor picture quality!

摄像头直径建议44mm-40mm圆形 该摄像头1080p版清晰度有问题附上购买连接及画质，自行决定！画质太差作者不负任何责任！画质太差作者不负任何责任！画质太差作者不负任何责任！