Q-Tip Crossbow

Introducing the second model in my Q-tip shooter series… The Q-Tip Crossbow! Simply pull back the latch until it clicks onto the trigger, load a one-sided Q-tip or toothpick, pull back the trigger, and watch it fly!

Notes: This model will vary depending on filament. I used Bambu PLA basic which tends to be pretty stiff, so other types of PLA, especially cheap brands, may not yield as good of a result.

Keep in mind that brittle/wet filament will be more subject to cracking than newer filament.

With other models in this series, people have had good results with PETG, but I have not personally tested it.

Make sure to let the model completely cool before using, or else the springs will deform and not be as effective.

Check out the original model: https://makerworld.com/en/models/412624#profileId-314579