April 15, 2024
Description
Designed as a print in place table tennis bat / ping pong paddle.
All in one, no assembly required!
Modelled as solid so you can customise the fill to your liking.
Just turn the top and bottom layers off and adjust the infill to suit :)
Example printed @ 80% to fit my Anycubic Kobra 2 print bed.
Printed flat with supports
Material: PLA
Layer height: 0.2mm
Walls: 4
Top and bottom layers: 0 (OFF)
Infill: Tri-Hex @ 35% (try your own!)
License:
BY-NC-SA
Cpt_Oats
