IDF Insignia Keychain

Show your support for Israel and its brave defenders with this keychain showcasing the insignia of the Israeli Defense Forces (IDF)!

Recommended Print Settings:

0.4mm nozzle

0.2mm layer height

2 walls, Arachne

Ironing on Top Surfaces

15% Gyroid infill

No Supports

No Brim

Powered by Image to Keychain from MakerWorld (https://makerworld.com/makerlab/imageToKeychain)

Update May 24, 2024: Added a version that does not require an AMS. It is a simplified STL requiring only 6 colors, in which each color is featured at a different height. This version can be created by switching filaments at specific layers. These are the STL and Profile with files names “_LayerChangesOnly.” These layer changes are already included in the Bambu Profile:

• Start with Black
• At layer 11 (2.2 mm), swap to White
• At layer 12 (2.4 mm), swap to Blue
• At layer 13 (2.6 mm), swap to Yellow
• At layer 14 (2.8 mm), swap to Grey
• At layer 15 (3.0 mm), swap to Green
• At layer 16 (3.2mm), swap back to Black

Please note: I am publishing this model under a non-commercial license. However, you MAY use this model for commercial purposes IF AND ONLY IF you donate at least 50% of your proceeds to a verified charity that is supporting Israel’s self-defense efforts - including efforts to support the IDF, Israel’s hospitals and medical personnel, or Israel’s humanitarian needs. Thank you.

Am Yisrael Chai!