Fingerboard Park! (Ramp, Stairs, Rail, and Corner)

A fully 3D printed skatepark for a fingerboard! I recommend using tape or putty to hold down the pieces. Print as many as you need! Please refer to the photo on ideal printing orientation. Also note the placement of supports underneath the outside edges of the rail. If your printer struggles with overhangs or you want a better overhang, also consider supporting the middle of the rail.

Update 11/25/24: Added “Thin” version of the quarterpipe that makes it only one layer thick on the bottom. This makes it easier to get a board onto the ramp. It can be printed from the “Individual Ramps” profile. Thanks for @HardwareMaster for the suggestion!

Boost MePlease leave a boost and review if you enjoyed!

This model was designed by Zammer 3D and posted here on MakerWorld.com under the Standard Digital File License. Feel free to print for yourself, but do not sell this model. Thank you for respecting the license and supporting me!

 

Commercial License and Tips Please check out my Buy My a Coffee page to leave a tip, become a member, or purchase a commercial license.

Happy printing!

-Z