New Version that fit all Babyphone Cameras with a standard Camera Thread 1/4-20 UNC
Easy to print, no supports, all bolts printable
Idea
Newly made dad who didn't feel like spending money again for a simple holder and also didn't wanted to drill holes in the wall.
I made the first version specific for the Momcozy Setup, but didn't like that you saw a bolt in the view.
This new version don't has this problem anymore and is compatible to many more Cameras that have the 1/4-20 UNC Thread.
I modeled a Hirth Joint between the camera platform and the base with 20 clicks to adapt the angle.
* Update
I reworked all bolts and threads to have more play
Added *.step File, feel free to modify
The parts
Clamp base
Base top
Camera platform
1x big 20mm bolt, easy turn-able with your hand
1x 6mm bolt to connect base with top
1x 10mm bolt with handle to adjust camera angle
1x 1/4-20 UNC camera bolt
How to assemble?
Verify if the bolt holes don't have small filament pieces, if so, remove them with a cutting tool
Check all bolts before assemble in there holes, sometimes you need to turn them back and forth a bit (i removed between 0,1-0,15 mm on all bolt threads - needed when you 3d print bolts)
Connect base top to the base with the 6mm bolt - 5mm Allen Key needed (the 6mm is longer than the 1/4-20 UNC bolt)
Screw the 20mm bolt in the base
Connect you camera to the platform with the 1/4-20 UNC camera bolt - 5mm Allen Key needed
Now connect platform to top base with the 10mm bolt with handle
Tight all bolts Carefully, no need over tighten.
What do you need?
Parts and bolts should be printed with different settings. Bolts need to be stronger
Printing instructions
I printed all on an Creality K1
I recommend PETG now, because its more flexible and don't change after time
Certainly you can use your own filament with your settings. The table below are my setting which give me good results for the bolts.
rauwman
