Swerve TPU Tread

This is a tread for all off the shelf swerve modules used in FRC. The tread can be used in place of the neoprene belting typically used on aluminum wheels. It's recommended to print the tread out of 95A TPU.

Instructions:

To install the tread, align the holes of the tread with the threaded holes on the aluminum wheel. Then stretch and press it over the flanges, this should be easy as there are 2 relief cuts in the tread allowing the tread to expand. Secure the tread to the aluminum wheel using #10-32 button heads with a thread locker.